maduino | Makerfabs

Maduino 4G

4G LTE provides high speed data transmission with dedicated SIM card inserted.

Maduino 4G solutions include Cat 1/ CAT 4, with GNSS, for different areas/ project requests, based on SIMCOMM 7600/ A7670/ 7670G/ 7080G.

Check Makerfabs 4G solutions

Maduino NB-IOT

NB-IoT for stationary low-bandwidth and deep indoor devices.

Maduino NB-IOT based on SIM7080G, integrated SD card/GNSS/Cat-M, compatible with Arduino IDE, strong extension interface I2C/ SPI/ UART/ GPIOs, for quick prototyping NB-IOT applications.

Maduino CAN / RS485 BUS

32-bit ARM® Cortex®-M0 controller SAMD21G18A(Arduino zero compatible) development board, with industry field communication RS485 and CAN Bus (CAN V2.0 at 1M/s), OBDII supported.

Maduino Zero 4G LTE SIM7600, 4G IoT Solution

Makerfabs Maduino Zero 4G LTE module uses the SIMCOM7600(E/A）CAT4 module, to help Makers to achieve the 4G connection easily. Besides, this module can be a fully 4G access to your computer/Raspberry Pi, and also for telephone/SMS...

WiKi

GitHub

Getting Started with Maduino Zero 4G LTE Board | SIM7600

This video will help you easily get started with Maduino Zero 4G LTE board from Makerfabs. Basically it's a SIM7600 based board with an ATMega Samd21 chip on it. It has a lot of features built-in to quick start your IoT journey.

WiKi

GitHub

DIY 4G Air Quality and Environment Monitor - Record Data Anywhere

This video going to use the Maduino Zero 4G board to create an air quality and environment monitor that posts data to a Thingspeak dashboard using a mobile 4G network. The Maduino is a great all-in-one Arduino development board with built in 4G and GPS modules.

WiKi

GitHub

Maduino Zero 4G GPS Tracker

This video shows a 4G GPS tracker project based on the Maduino Zero 4G GPS Tracker, more details can be seen here：https://markelthinkslearnscreates.wordpress.com/2023/02/07/maduino-zero-4g-gps-tracker/