MaPIE RP2040 0.96

MaPIE RP2040 0.96" OLED

Pico W Primer Kit for Raspberry PI

$47.80
Availability: In stock
SKU
RAPICOWSTPK

This Pico W primer kit is the upgrade version of the Pico primer kit, to suit the new Raspberry Pi Pico W.

Raspberry Pi Pico is a low-cost, high-performance microcontroller board based on the RP2040, while the Pico W adds on-board single-band 2.4GHz wireless interfaces (802.11n) using the Infineon CYW4343 while retaining the Pico form factor. It features:
● Wireless (802.11n), single-band (2.4 GHz)
● WPA3
● Soft access point supporting up to four clients
Three-Picos
Pico-W-Pinout
This primer kit for Pico W is composed of many kinds of sensors/actor modules, with the standard Mabee connector (Grove compatible), so it is ready for plug& play. There we provide detailed tutorials for each module with Micropython, so the users can learn the PICO(RP2040 ) hardware and Micropython programming quickly& easily. Besides, Arduino also supports the PICO good, please check How to use Raspberry PI Pico with Arduino.
Pico-W-Kit-Demo-TVOC Pico-W-Primer-Kit-Demo-1

Basically, Pico& Pico W pins are compatible, so most of the kit hardware& demos are the same. But as there is already onboard WIFI on Pico W, so the Mabee_ESP8266 WIFI module is not needed in this kit. While we added the Mabee_TVOC and eCO2 SGP30 & Temperature and Humidity SHT31, which detects high precise temperature/ humidity/ TVOC/ eCO2, for air monitoring applications. And also the Mabee DHT11 sensors are replaced by the PIR sensor in this Kit, so the users can learn to use this interesting& popular-used sensor.

Parts List:

  • Raspberry Pi Pico W
  • PICO Primer Expansion Board
  • Mabee_6Aixs IMU MPU6050
  • PIR Sensor
  • Mabee_Relay_10A
  • Mabee_WS2812_8bit
  • Mabee_Servo SG90
  • Mabee_Slide Potentimeter
  • Mabee_TVOC and eCO2
  • Ultrasonic Ranger
  • Useful Link:

  • GitHub
  • Wiki
  • Write Your Own Review
    You're reviewing:Pico W Primer Kit for Raspberry PI
    Your Rating
    We found other products you might like!