Maduino UNO is an Arduino compatible board, which is based on ATmega328P MCU and Arduino UNO bootloader. It used a FT232 as a Uart- to- USB converter. You can program the board via a micro- USB cable. Also you can power the board via a DC Jack input,7 to 15V is acceptable.
|Input Voltage (recommended)||7-12V|
|Input Voltage (limits)||6-20V|
|Digital I/O Pins||14 (of which 6PINs provide PWM output)|
|Analog Input Pins||8|
|DC Current per I/O Pin||40mA|
|DC Current for 3.3V Pin||50 mA|
|Flash Memory||32 KB (ATmega328) of which 0.5 KB used by bootloader|
|SRAM||2 KB (ATmega328)|
|EEPROM||1 KB (ATmega328)|
|Clock Speed||16 MHz|
- USB TO TTL chip:FT232
- Flat DC Jack.
- Inherits all of Arduino Uno's features.
- Compatible to Uno's pin layout, screw hole and dimensions.
- Evolved with SMD components.
The Maduino UNO board has almost the same usage with that of Arduino UNO board.
If you have any problem about how to use it, you can contact to firstname.lastname@example.org to get technology support.