Difference between revisions of "Maduino Uno"

From MakerFabsWiki
Jump to: navigation, search
(Note)
(Resources)
Line 62: Line 62:
  
 
== Resources  ==
 
== Resources  ==
*[https://makerfabs.com/wiki/index.php?title=File:STM32.pdf STM32  PDF]
+
*[https://www.arduino.cc/en/Reference/HomePage Reference]
*[https://makerfabs.com/wiki/index.php?title=File:ELE_GPRSshield_v1.0.pdf Schematic of GPRS/GSM Shield]
 
*[https://makerfabs.com/wiki/index.php?title=File:STM_PDF_STM.zip STM32 PDF]
 
*[https://makerfabs.com/wiki/index.php?title=File:STM_PDF.pdf STM PDF]
 
*[[File:STM PDF STM.pdf]]
 
*[[File:STM PDF STM.zip]]
 
  
 
==Support==
 
==Support==
 
If you have any problem about how to use it, you can connect to us at [http://www.elecrow.com/ the bottom-right of bazzer] or contact to  '''techsupport@elecrow.com '''to get technology support.
 
If you have any problem about how to use it, you can connect to us at [http://www.elecrow.com/ the bottom-right of bazzer] or contact to  '''techsupport@elecrow.com '''to get technology support.

Revision as of 04:10, 25 October 2017

Description

Maduino UNO is an Arduino compatible board, which is based on ATmega328P MCU and Arduino UNO bootloader. It used a FT232 as a Uart- to- USB converter. You can program the board via a micro- USB cable. Also you can power the board via a DC Jack input,7 to 15V is acceptable.

Model OAC0328MU

Maduino UNO.jpg

Summary

Microcontroller ATmega328
Operating Voltage 5v
Input Voltage (recommended) 7-12V
Input Voltage (limits) 6-20V
Digital I/O Pins 14 (of which 6PINs provide PWM output)
Analog Input Pins 8
DC Current per I/O Pin 40mA
DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader
SRAM 2 KB (ATmega328)
EEPROM 1 KB (ATmega328)
Clock Speed 16 MHz

Features

  • USB TO TTL chip:FT232
  • Flat DC Jack.
  • Inherits all of Arduino Uno's features.
  • Compatible to Uno's pin layout, screw hole and dimensions.
  • Evolved with SMD components.

Interface Function

Maduino UNO 1.jpg

Usage

The Maduino UNO board has almost the same usage with that of Arduino UNO board.

Resources

Support

If you have any problem about how to use it, you can connect to us at the bottom-right of bazzer or contact to techsupport@elecrow.com to get technology support.